MAXPEDITION 12-Inch X 5-Inch Bottle Holder

what our customer say this product:

Powered by

1. Byron Lively Verified Buyer – 20 June 2024

   Hadn’t really looked for this but when I did — bam! Found this.
   I have a 64 oz. Klean Kanteen growler (specifically for beer — works great) and it fits great in this pouch. Just a shade of extra room but still nice and secure.
   I’ve been wanting a bag/pouch for my Toaks 1100ml pot (and the wood-fire stove that’s supposed to nest inside) but the listed dimensions for this pouch seamed a little small. Fits right in, mesh bag (on the Toaks) and all. haven’t maxed it out yet. Bought a second one. Growler and cook-set.
   Maxpedition: quality is good (way). Made in Taiwan: could be worse. Been stored flat so the zippers were a bit stiff. Crammed the growler in and it made the shape cylindrical again. Did that for both pouches: worked fine.
   I’ve yet to field test much (one outing for the growler) but I suspect these will do well.
   I will update if anything changes.
   

2. J. J. Robbins Verified Buyer – 8 January 2025

   Saw someone use this for their JetBoil portable cooking system and said I need one too. It is a little pricey for a case, but it does just what I need it to, keep my $100 camping cooker safe. Maxpedition is a good brand and you get what you pay for. This is not made of a cheap material that will rip. I’m thinking a grinder or circ saw should cut thru; but besides that, anything you can do to it short of being tied to the bumper of your car and pulling around town for the day, it should last a very long time. The whole JetBoil system fits, with an extra fuel tank (besides the one in the JB mug), and an extra 3inch tall mug I had in there too. The outside zippered pouch is good for holding any extra forks or utensils you might bring also. Has a straps and also some velcro all over to help stick to places you might want to hold it. It’s a little expensive for a case but I feel if it is what you are looking for, spend the money and you will be happy with the purchase.
   

3. Mincheva Verified Buyer – 18 January 2025

   Super !
   

4. Maxpedition 12-Inch X 5-Inch Bottle Holder DEMO Verified Buyer – 1 February 2025

   This bag fits my lifesaver 6000 water bottle/filter perfectly, I keep extra carbon filters in the front, 2 extra sponges in the bottom and a light on the zipper, my only complaint is that with the bottle inside, the front pouch becomes very small. There is space inside the main pocket for some plastic water collection bags and I am currently looking for a metal cup that the lifesaver will fit inside of so it can go down inside of the maxpedition bag. The fabric is a very tight weave synthetic that is water repellent and very durable, the zippers have a very positive pull that some may think is a little too tight but I think is a sign of good quality. On the subject of the zippers, I do not know if they are meant to be water tight but I do no that they are very water resistant with a tight tooth and an extra large ‘flap’ over the zipper, they repel and resist water and leakage extremely well. As a result of the water resistant construction and tight zippers, I have felt comfortable using the water bottle case as a water collection device. I leave a single sponge in the bottom of the bottle holder, empty the case of it’s contents and zip all of the pockets shut, then I tie a piece of paracord onto the two d rings to make a long loop (30 or so feet of paracord makes a 15 foot loop.) I cast it into a river, stream or pond where I let it slowly “sink” as water seeps in through the drainage grommet on the bottom of the main compartment, this seeping “prefilters” the water through the lifesaver sponge, after the bottle holder has sunk I just pull it right to shore, through the sand, weeds and mud, and access the water inside which I drain either into a collection bag or into the lifesaver for filtration. The small size of the drain grommet and water resistant construction allows me to do this several times and fill all of my water bottles without the bottle holder getting water logged and the high internal volume means that I can fill 6 whilrpak 1ltr bags and the lifesaver in just 4 or 5 “casts” of the maxpedition water bottle holder. Final word, this is a great product that keeps another great product safe and adds to it’s functionality!

   

5. Spruce Verified Buyer – 6 February 2025

   Like others I’ve been debating if it’s worth the money and it IS top gear quality. The fabric is thick, sturdy and insulated. This can hold all five C’s; Container, Combustion, Cordage, Cover, and Cut. You can attach it all to the sides and store other gear in the roomy pouch. It can be used instead of a pack using a shoulder strap. It also stashes good in or attached to a ruck sack with the molle webbing all around the bag. My only gripe is, the molle straps have to be purchased separately.
   

6. Kenrick Verified Buyer – 5 March 2025

   This fits my Guyot Design Backpacker stainless steel water bottle inside a Snow Peak Titanium Trek 700 Cooker with plenty of room for extra. If you want a water bottle holder to attach to anything smaller than a 2000 cubic inch 3-day pack, size down. If not or you want to carry this alone as an emergency kit carrier, this is a good size. The PALS webbing on the side is ideal for attaching the holder sideways on a pack to reduce overall bulkiness. The design of the top with zipper makes it seem like a mechanical puzzle sometimes; however, it’s functional and very durable. The holder comes with the same clip as the 10×4 and all the pictures of the 10×4 are an accurate representation of this one except this one has a strap on the back that seems to be a handle.

   I’d buy this again and would give it 5 stars if it had integral straps to attach it’s PALS to a packs PALS.
   

7. Cory Verified Buyer – 8 March 2025

   Expensive, but good bottle bag, very useful
   

8. Matthew C Verified Buyer – 11 March 2025

   This pouch is great! It’s very durable. It fits the Klean Kanteen 40 & 64 oz bottle with a few inches of head room. I haven’t checked if I can fit the MSR fuel can in there too, but I’ll update my review once I do. The Grayl Geopress fits as well, with plenty of side room, but the lid reaches the top of the bag, so you can’t fit anything above or below the bottle. I wish the external pouch was a little larger. I think Maxpedition could’ve made it slightly larger without it seeming awkward. Then again, there’s plenty of molle to add pouches on the sides. I just didn’t want to buy more pouches, and don’t know if I want to add the extra bulk either.
   

9. Sergio Verified Buyer – 20 March 2025

   Pues eso. Es algo cara, pero se ve bien fabricada. Una ICOM IC-705 cabe perfecta, con los cuatro accesorios, micro, trípode ATU-10…
   

10. Jason Amos Verified Buyer – 21 March 2025

    I own quite a few Maxpedition pouches. I really like the durability and adaptive nature of the products. The Maxpedition 12” bottle holder fits my wide mouth 750ml Stanley thermos perfectly. I clip the Maxpedition to my lunch bag (the thermos doesn’t fit inside) and my soup, or stew follows me wherever I go. Front pocket is big enough for an extra spork, opined #10, bandana, hand sanitizer plus a few more bits. Really useful for me.