Suppressor Cover – Dual Layer Heat-Resistant Suppressor Covers for Extreme Firearm Heat Protection, No-Slip Fit, 1.5 inches Diameter with Multiple Lengths

what our customer say this product:

Powered by

1. Sandman Verified Buyer – 13 September 2024

   I run it on a Witt Machine Mod-1 it’s a tiny Can on a very Angry full Auto Tavor .300blk. I have not burned my leg yet and 2,500rds later it’s still holding on strong.
   Obvious does and don’t are being applied here.
   

2. Burn Proof Gear Cover Verified Buyer – 10 November 2024

   ***Update to statement below: BP had me call them and Alain was fantastic. He is having me send my blown out cover back and they will be sending me another cover that is 0.25″ longer than the one I got. I greatly appreciate them making this right and I will now up their star rating in my review. Looking forward to getting the new cover! Item seems to be of good materials and construction. My issue is with both Burn Proof and githubja.com. Based on the manufacturer’s recommendations, I ordered the 7″ variant. After installing, it seemed to be a little too short compared to all pictures I’ve seen where it wraps around both ends a little. Mine seemed to just come to the ends and looked like it wouldn’t be a secure fit. I tried to return it for the 7.5″ variant through githubja.com, but a “wrong size” option isn’t available, so githubja.com just sent me an exact replacement. After submitting the exchange through githubja.com, BP contacted me via email. I showed them pictures of the installation and was told it looked right, so when githubja.com’s replacement came, I just sent it back. After about 10 min of shooting, the cover came off the front and landed about 6′ in front of me with the front blown out. I imagine this would not have happened if it had be wrapped around both ends. Specifically the rear section. I took a picture and informed BP, but have not received any reply. I’m pretty disappointed as these aren’t cheap, and I’ve read their customer service was excellent. I had hoped they would have reached out in an attempt to make things right, but at this time, that hasn’t happened. BTW, I tightened the cordage down VERY tightly, so it didn’t come off because it was loose.

   

3. Bigcountry14 Verified Buyer – 1 January 2025

   Perfect fit on my huxwrx. Little tight, but made it work. Looks great. Ready to run it and put the heat to it
   

4. Kona556 Verified Buyer – 14 February 2025

   This wrap is a “game changer”! If you’ve ever made the mistake of accidently touching your suppressor after sending 100 rounds downrange, you’ll truly appreciate this product. Don’t waste your time and money on off-brand knock-offs by other manufacturers that will either melt permanently onto your can or catch fire turning your rifle into a torch!

   My Burnproof wrap protects me from burns and allow me to safely handle my suppressor when hot (gloves are still recommended). It also significantly reduces “suppressor mirage” caused by heat rising from the can which distorts the sight picture in your optics.

   I entrust my kit with my life and the lives of those whom I protect. There is no room for compromising quality and safety for cost. My suppressors are a vital part of my kit and I’ll stake my life on them. That’s why I only wrap them in Burnproof covers.
   

5. Anonymous Verified Buyer – 1 March 2025

   The only thing good about this cover is that it looks cool. It blew off of my suppressor after 20 rounds. I think there are many better options for far less money. It was honestly $175 down the drain.
   

6. Blades And Boom Verified Buyer – 3 March 2025

   Got this despite some of the reviews having had theirs melted. It seemed the best option without spending multiple hundreds of dollars. I have had no issues with melting on mine even with relatively rapid firing. I have no doubt that SOMEONE would be able to heat up their suppressor enough to cause issues, but as long as you use the expanding sleeve under it, it shouldn’t damage the suppressor in those scenarios.
   This is one of those things that you will have to make up your own mind on, however, having friends with some of the other options in this price range and lower, I am the only one that hasn’t had melty melty issues. I would recommend it since I haven’t had any issues, but of course depending on what you are doing your results may vary. (Tested on .22LR, 9mm, 5.56, 300blk using JK PCX 155)
   

7. Omar Verified Buyer – 4 March 2025

   Always was hesitant to purchase. Don’t know why, I waited so long. Didn’t get custom fit for my 762 mini. Fits fine for a 6.5″ cover. Also, think it will fit perfect on socom 556. For what I like.
   

8. kidssurgeon Verified Buyer – 24 March 2025

   At first I hesitated about the price but after trying a cheaper brand and setting that one on fire after 20 rounds this was the go to. It performed flawlessly. Easy to put on and the fit was perfect based on the factory dimensions of my suppressor (ODB). Inner sleeve needed to be cut down a bit but that was easy with regular scissors. I did a day long course firing off over 120 rounds and it always stayed touchable. I will get my next cover from them as well. One of my best safety investments lately.