| Operation Mode | manual |
| Contact Type | Pressure |
| Connector Type | Clamp, Plug In |
| Brand | SureFire |
| Terminal | Physical |
| Item dimensions L x W x H | 7 x 4 x 0.01 inches |
| Circuit Type | 2-way |
| Mounting Type | Wall Mount |
| Actuator Type | Plunger |
| Contact Material | Copper |
- Momentary-on switch activates SureFire WeaponLight, Insight ATPIAL, or both
- Weatherproof plugs and pressure pad switches
- Snap-on clamp for Picatinny rails














WNF Verified Buyer –
It’ll pop out under recoil. You have to trim the bottom lip/edge so it seats all the way. Dremel works the best. Do that and it stays in.
Anonymous Verified Buyer –
I run a Surefire M952V and a LDI DBAL i2. I’ve heard from research that the plug designed for the ATPIAL doesn’t fit well in the DBAL. It fits great, better than the LDI plug. It has a tactile click, when plugging it in, and doesn’t come out unless you remove it by hand, no coming out during recoil. The wires are quality, well made, strong wires. I would expect nothing less from Surefire. This is a great switching option, as you would have both your white light/IR light, and your laser device switches in one location. The front switch, with the bump, is for your light, and the other is for your laser. Hit the switch twice, on the laser side, and now you have constant on.
Hank Verified Buyer –
Using this for SureFire and DBAL I2. I modified the DBAL I2 by carefully filing down the shoulder of the plug on this switch. I only took off a few thousandths. It is a perfect fit now. Hundreds of rounds later I have not had the plug come out or get loose.
Filippo Verified Buyer –
Compatibile cin Holosun LS221
johncaseria Verified Buyer –
Accurate product description
Jason 0828 Verified Buyer –
Had to return it. The plastic tip that plugs into the BDAL was broken on arrival.
JVR Verified Buyer –
What I ordered, arrived efficiently. If running a laser and flashlight that’s compatible with the connectors, great switch for installing on a pic rail. Surefire builds great high quality products, but don’t they know it by their pricing vs other brands.
Mammynun Verified Buyer –
…you probably have a pretty good idea of what it’s for, so I’ll be brief. First, typical Surefire quality. I use mine in conjunction with an M600 Scout light and an Laser Devices CQBL. The fit of the plug into the CQBL could be tighter, but it works 100%. If I have any issues I plan to put a zip tie around the assembly to hold the plug in, but this hasn’t been necessary through ~1.5k rounds.
Anonymous Verified Buyer –
Works well